Test pH weekly and maintain a pH balance of between 7.2 and 7.6. Adjust your chemical usage as needed. Use SwimClear pH Down if your pH is over 7.6, and use SwimClear Spa Up if your pH is below 7.2.
• Test alkalinity weekly and maintain a level between 80 ppm and 120 ppm. Adjust your chemical usage as needed. Use Leisure Time Spa Down if your alkalinity is above 140 ppm and use Leisure Time Spa Up if your alkalinity is below 80 ppm.
• Check your water hardness regularly.
• Test your chlorine/bromine weekly and maintain a proper sanitization level. To adjust your chlorine/bromine levels use SwimClear Chlorine Granular. Chlorine and Bromine levels should be maintained at 3 ppm.
• To maintain the health of your water and spa, shock your water with Leisure Time Renew weekly and after each water change. If using an ozone system, we recommend using SwimClear Spa Oxidizing Shock.
As a thank you to you, Family Leisure offers a free water test service. After you have your spa up and running for 2 weeks Family Leisure strongly recommends you bring in a water sample to the store. We will test your water for free. We will guide you to get your spa to proper water chemistry. Family Leisure will also answer any questions you might have in regards to your spas operation, water balance, and basic maintenance. Based on your water test results we will recommend the proper chemicals, filters, and maintenance supplies for the next 6-12 months.
Quarterly you should:
- Drain your spa (to prevent solids from building up)
- Replace your quarterly filter
- Replace your Frog Mineral Cartridge
- Deep clean your yearly filter with SwimClear Filter Clean
